by lada | Sep 21, 2021
Aluminum six piston brake calipers for Lada This caliper has the same features as the four piston one. The difference in using six pistons which increase the clamping force slightly over the stock and over the four piston. The piston area of the stock one is 36.2 cm2,...
by lada | Sep 21, 2021
Twin turbo 370Z manifolds development The manifold were developed for Kraken. Sides of the VQ37VHR engine and part of the subframe were scanned and also the turbocharger used. The work was done with not much problems and now the manifold are in production phase. The...
by lada | Sep 21, 2021
Sequential turbo system for Lada This is a future project, that I am wanting to do for quite a while. The turbochargers used are a bit to big for what I am planning to do. Later I will calculate exactly what turbo will be suitable for my application. This model, shows...
by lada | Dec 26, 2019
BBS E50 E55 with turbo fan cover What is seen here is an accurate model of the three pieces of a standard BBS wheel. This work-piece began by coming across an original drawing that had been done of the center section of the wheel. While the original drawing as...
by lada | Mar 27, 2021
Ventilated brakes Lada 2101-2107 Modifying Lada classic models (2101-2107) for improved road performance, rallying and racing. Reason for making them? The main reason is the lack of suitable solution for this brand. There are aftermarket products, but they are too...
