Twin turbo 370Z manifolds development

The manifold were developed for Kraken. Sides of the VQ37VHR engine and part of the subframe were scanned and also the turbocharger used. The work was done with not much problems and now the manifold are in production phase. The manifold will be cast into pieces, that later will be welded. After the manifolds are installed, suitable place for the wastegate will be chosen and it will be connected to the manifolds via piece of pipe and welding.

Left side front view

Left side back view

Left side view

Right side front view

Right side back view. The place where the wastegate will be welded is visible on the left end of the manifold

Right side view