by Georgi | May 28, 2024 | Lada inline six cylinder engine.
The crankshaft The crankshaft will be assembled from several parts. This is prototype crankshaft, so I am not that concern about strength. I will statically balance the crankshaft, on the picture the counter weights a missing, they will be probably mechanically...
by Georgi | May 28, 2024 | Lada inline six cylinder engine.
The cylinder hear and camshaft The cylinder head will be cut the same way as the block. This means that it will be cut through the middle of the combustion camber and through the spark plug hole. The last will be a bit tricky to weld, but it seems possible. The...
by Georgi | May 28, 2024 | Lada inline six cylinder engine.
The cylinder block Everything will start with two stock Lada 2105 block. The one that will be the front section of the new engine will be cut through cylinder number 3. The rest of the new six cylinder engine block will be completed by a section of the second engine...
by Georgi | May 28, 2024 | Lada inline six cylinder engine.
Lada inline six cylinder engine, project overview. After watching Garage 54, I decided to develop this engine the proper way. So, I sat down and done it. Here I will explain each step and how every component will be modified to make inline six cylinder Lada engine...
