by Georgi | May 28, 2024 | Lada inline six cylinder engine.
Lada inline six cylinder engine, project overview. After watching Garage 54, I decided to develop this engine the proper way. So, I sat down and done it. Here I will explain each step and how every component will be modified to make inline six cylinder Lada engine...
by Georgi | May 27, 2024 | Casting 13″ 3 piece wheel
Inside barrel 4×13 https://vftsmotorsport.com/wp-content/uploads/2024/05/Inside-barrel-4x13-pouring.mp4 Inside barrel 4×13 pouring. https://vftsmotorsport.com/wp-content/uploads/2024/05/Inside-barrel-4x13-solidification.mp4 Inside barrel 4×13...
by Georgi | May 27, 2024 | Casting 13″ 3 piece wheel
Outside lip 2×13 The outside lip is 2″ wide. It will be attached to the center section via 18 bolts and will be centered by the central opening. https://vftsmotorsport.com/wp-content/uploads/2024/05/Outside-lip-2x13-pouring.mp4 Outside lip pouring....
by Georgi | May 27, 2024 | Casting 13″ 3 piece wheel
Center section The shape is derivative of BBS E50, E55 model. The dimensions were made to fit my requirement for mounting 13″ tire and some other small changes were made. The first casting will be with 4×98 bolt patter, later I will cast some with a single...
by Georgi | May 27, 2024 | Casting 13″ 3 piece wheel
Overview of the project. Here I am going to showcase the process of casting a custom wheel based on BBS E50/55 three piece split wheel. The wheel is engineered to be fitted with 13″ tires and can fit big calipers with ventilated disks. The center section has two...
