by lada | Sep 21, 2021
Sequential turbo system for Lada This is a future project, that I am wanting to do for quite a while. The turbochargers used are a bit to big for what I am planning to do. Later I will calculate exactly what turbo will be suitable for my application. This model, shows...
by lada | Sep 21, 2021
Twin turbo 370Z manifolds development The manifold were developed for Kraken. Sides of the VQ37VHR engine and part of the subframe were scanned and also the turbocharger used. The work was done with not much problems and now the manifold are in production phase. The...
by lada | Sep 21, 2021
Aluminum six piston brake calipers for Lada This caliper has the same features as the four piston one. The difference in using six pistons which increase the clamping force slightly over the stock and over the four piston. The piston area of the stock one is 36.2 cm2,...
by lada | Sep 21, 2021
Yamaha ZF6 throttle bodies adapted to Lada cylinder head The throttle bodies are adopted to be direct bolt on, nothing need to be cut or moved. Currently all the parts are 3D printed and installed on the car. I attempted to start the car, but had issues with the...
by lada | Sep 21, 2021
Lada short shifter gear lever and hand brake relocation An attempt to make a proper short shifter for Lada. The travel left to right is around 40 mm, back and forth is the same number. It is high and very close to the steering wheel, making it very easy and fast to...